AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » H290C dimensions (dimensions for the recessed cutout)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: H290C dimensions [message #73438 is a reply to message #73414]

Tue, 31 July 2012 16:48

zheka
Messages: 80
Registered: June 2012
Location: Chicago burbs

Viscount

Wayne,

If I want to flush mount, should I use 1" MDF panel for the front baffle or 3/4" panel is adequate in your opinion? Given that the recess is 1/4" deep.

Thanks again!

Report message to a moderator

[Message index]

		H290C dimensions By: zheka on Mon, 30 July 2012 13:28
		Re: H290C dimensions By: Wayne Parham on Mon, 30 July 2012 14:18
		Re: H290C dimensions By: zheka on Mon, 30 July 2012 14:36
		Re: H290C dimensions By: gofar99 on Mon, 30 July 2012 16:20
		Re: H290C dimensions By: Wayne Parham on Mon, 30 July 2012 22:43
		Re: H290C dimensions By: zheka on Mon, 30 July 2012 23:38
		Re: H290C dimensions By: Wayne Parham on Tue, 31 July 2012 07:20
		Re: H290C dimensions By: gofar99 on Tue, 31 July 2012 10:15
		Re: H290C dimensions By: Wayne Parham on Tue, 31 July 2012 10:44
		Re: H290C dimensions By: dheflin44 on Thu, 29 November 2012 12:11
		Re: H290C dimensions By: Wayne Parham on Thu, 29 November 2012 12:33
		Re: H290C dimensions By: dheflin44 on Thu, 29 November 2012 12:46
		Re: H290C dimensions By: zheka on Tue, 31 July 2012 16:48
		Re: H290C dimensions By: Wayne Parham on Tue, 31 July 2012 17:18
		Re: H290C dimensions By: zheka on Wed, 01 August 2012 07:18
		Re: H290C dimensions By: Wayne Parham on Wed, 01 August 2012 07:46

Previous Topic:	Speaker placement and wavefront launch
Next Topic:	Spectral decay time of HF drivers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 09 00:49:50 CDT 2024