Home » Sponsored » Pi Speakers » Just can't let that poor, dead horse alone! With PIX!
Just can't let that poor, dead horse alone! With PIX! [message #71724] Sun, 11 March 2012 16:19 Go to previous message
Bill Epstein is currently offline  Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA
Illuminati (2nd Degree)
The failed, but attractive Altec/Universitys are where I see them daily and so I hypothesize daily.

Today, it occurred to me that maybe going back to the 1.35 cubic foot cabinet I began with that caused me to love them in the first place would be the logical step before burning the boxes. Now that I know the T-S specs, the 2.5 cu ft cabinets are worthless, anyhow.

So I opened'm up and saw to my delite, as I suspected, that the window pane brace under the woofer was right where it needed to be to support a partition leaving 20" of cabinet which equals about 1.35 cubic feet.

index.php?t=getfile&id=740&private=0

And I don't build just any old window pane brace, kids...mine are Colonial Window Panes, which means that there's a center muntin to hold a 2-piece floor...which is necessary 'cause you can't get a 1 piecer in there thru the woofer hole! Better to be lucky than schmart every time!

Put a thick bead of silicone on the brace and another after placing the floor to get it sealed up tight. After they're dry I'll fire'm up and report back. The boxes'll probably wind up in Spkrmns garage but I figured it was worth a shot. Laughing Laughing

index.php?t=getfile&id=741&private=0
 
Read Message
Read Message
Read Message
Read Message icon12.gif
Previous Topic: Mounts for 1pi Speakers
Next Topic: 4Pi Plans
Goto Forum:
  


Current Time: Fri May 10 04:47:24 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest