AudioRoundTable.com: Pi Speakers » High-pass on the 4pi?

Home » Sponsored » Pi Speakers » High-pass on the 4pi?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

High-pass on the 4pi? [message #71580]

Wed, 29 February 2012 12:53

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

I have decided to stick with my original plan of using four F20 horned subs low-passed at about 80Hz. I am told that four of them grouped together will have a relatively flat EQ and will put out 130dB SPL from 21Hz to around 80Hz @ 1m. I realize I will have to delay the 4pi mains to sync up with the horned subs. My question is should I high-pass the 4pis, and if so; at what frequency? Will these subs integrate well with the 4pis as mains?

Report message to a moderator

[Message index]

		High-pass on the 4pi? By: dutchswan0311 on Wed, 29 February 2012 12:53
		Re: High-pass on the 4pi? By: Wayne Parham on Wed, 29 February 2012 14:08
		Re: High-pass on the 4pi? By: skywave-rider on Thu, 01 March 2012 12:49
		Re: High-pass on the 4pi? By: Wayne Parham on Thu, 01 March 2012 14:33

Previous Topic:	Old 3pi pro vs current 1pi/2pi
Next Topic:	Choosing the correct amps to run my Pi Speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 21:22:32 CST 2024