AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » JBL 2226H driver

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

JBL 2226H driver [message #71424]

Mon, 20 February 2012 08:31

gilstone
Messages: 7
Registered: February 2012

Esquire

Hi Guys,

I have some questions about the JBL 2226H drivers that i have recently purchased.

There are quite a number of small ripples at the back of the woofer as you can see from the picture attached. The previous owner told me that it is not a reconed speaker, all original.
Any idea what caused the small ripples at the back of the woofer?

When i use a meter to measure the impedance of the speakers, it read 5.6 ohms on both the speakers. Is it consider too low? will the impedance drop again with age?

Hope you could clear my doubts. Thanks.

index.php?t=getfile&id=720&private=0

Attachment: IMG.JPG
(Size: 516.02KB, Downloaded 2618 times)

Report message to a moderator

[Message index]

		JBL 2226H driver By: gilstone on Mon, 20 February 2012 08:31
		Re: JBL 2226H driver By: Wayne Parham on Mon, 20 February 2012 10:17
		Re: JBL 2226H driver By: gilstone on Tue, 21 February 2012 17:10

Previous Topic:	8 Pi Plans
Next Topic:	1pi plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 13:14:17 CST 2024