Home » Sponsored » Pi Speakers » 2-Pi towers or 3-Pi's ? (Sound comparison.)
2-Pi towers or 3-Pi's ? [message #69106] Sun, 21 August 2011 19:10 Go to previous message
Wayne-o is currently offline  Wayne-o
Messages: 225
Registered: May 2009
Master
Comparing the two both in a 3.8 cu. ft box 20x30x14 tuned to around 40-44 hz. Tone is very close to being the same. What stands out on the 2-pi is the silky treble and maybe a little more Fat on the low end. Not much if any volume difference.
On the 3-Pi's more true to life mid range. This is at a normal volume range around 1 watt average. When the power goes up the 3-pi's impact or dynamics start to prevail above 10 watts or more. OK I prefer to build both of them. They are both High Fidelity.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Information about Pi Speakers
Next Topic: Used / Second Hand JBL 2225H
Goto Forum:
  


Current Time: Mon Nov 25 04:46:42 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest