AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » Valve Phono Preamp

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Valve Phono Preamp [message #68443 is a reply to message #68442]

Sat, 02 July 2011 18:09

gofar99
Messages: 1906
Registered: May 2010
Location: Southern Arizona

Illuminati (5th Degree)

Hi,

Oops. I used two different sets of values the 113K matches a 220K grid resistor and an 82K matches the 1meg value. When I checked the actual final version it was the 82K and 1meg value. Thanks for the sharp eyes. I will replace the schematic with a correct one. I fixed the schematic in the file. Thanks again.

Good Listening
Bruce

Report message to a moderator

[Message index]

		Valve Phono Preamp By: gofar99 on Fri, 01 July 2011 21:58
		Re: Valve Phono Preamp By: FL152 on Sat, 02 July 2011 15:49
		Re: Valve Phono Preamp By: gofar99 on Sat, 02 July 2011 16:50
		Re: Valve Phono Preamp By: gofar99 on Sat, 02 July 2011 18:09
		Re: Valve Phono Preamp By: FL152 on Sat, 02 July 2011 18:31
		Re: Valve Phono Preamp By: gofar99 on Wed, 13 July 2011 20:05
		Re: Valve Phono Preamp By: gofar99 on Sat, 16 July 2011 20:35
		Re: Valve Phono Preamp By: gofar99 on Mon, 29 August 2011 17:31

Previous Topic:	Guitar Amp
Next Topic:	KT120 Class A U/L Mono-Blocks

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri May 10 07:40:19 CDT 2024