AudioRoundTable.com: Pi Speakers » 2226j (16 ohm) usable?

Home » Sponsored » Pi Speakers » 2226j (16 ohm) usable? (question about 4pi)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

2226j (16 ohm) usable? [message #66369]

Sun, 27 February 2011 17:30

vectordirector
Messages: 3
Registered: February 2011

Esquire

Hi Wayne,

Please if you could, send me the 4 pi plans. A couple quick questions. Is the 4pi 4 or 8 ohms nominal? How about the individual drivers?
Also, I may have access to some JBL 2226j drivers. These are the 16 ohm spec. Can these be used in a 4 pi, and if so what needs to be done, if anything, crossover or tweeter wise to make this work? I'm seriously considering building these if these 2226j woofers can be made to work.

Thanks in advance for any info you can provide.

Vectordirector

Report message to a moderator

[Message index]

		2226j (16 ohm) usable? By: vectordirector on Sun, 27 February 2011 17:30
		Re: 2226j (16 ohm) usable? By: Wayne Parham on Sun, 27 February 2011 21:35
		Re: 2226j (16 ohm) usable? By: vectordirector on Sun, 27 February 2011 22:33
		Re: 2226j (16 ohm) usable? By: Wayne Parham on Sun, 27 February 2011 23:46
		Re: 2226j (16 ohm) usable? By: vectordirector on Mon, 28 February 2011 00:14
		three π / four π By: Wayne Parham on Mon, 28 February 2011 10:08
		Re: 2226j (16 ohm) usable? How about this approach, Wayne? By: ohiogaucho on Mon, 28 February 2011 13:27
		Re: 2226j (16 ohm) usable? How about this approach, Wayne? By: Wayne Parham on Tue, 01 March 2011 08:07
		Re: 2226j (16 ohm) usable? By: Bill Epstein on Sun, 06 March 2011 08:31
		Re: 2226j (16 ohm) usable? By: Adveser on Sun, 06 March 2011 13:21
		Re: 2226j (16 ohm) usable? By: Wayne Parham on Sun, 06 March 2011 22:06

Previous Topic:	Tweeter Change (again !)
Next Topic:	Four Pi R3 Mounting

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 21:47:43 CST 2024