AudioRoundTable.com: Pi Speakers » Double thickness front?

Home » Sponsored » Pi Speakers » Double thickness front?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Double thickness front? [message #62137]

Sat, 20 March 2010 12:33

CZ Eddie
Messages: 11
Registered: March 2010
Location: Austin, TX

Chancellor

I notice most pictures of the 4PI show the enclosure having a single thickness front, with both the 15" driver and horn mounted on top of the wood.

If I were to go with double-thickness front and flush mount the driver & horn, will that require any modification to the crossover or will it have any impact on the response?

This would bring the horn and baffle 3/4" forward, while the 15" driver stays the same. The vent would of course remain the same volume/length.

Report message to a moderator

[Message index]

		Double thickness front? By: CZ Eddie on Sat, 20 March 2010 12:33
		Re: Double thickness front? By: Wayne Parham on Sun, 21 March 2010 10:20
		Re: Double thickness front? By: CZ Eddie on Sun, 21 March 2010 11:38
		Re: Double thickness front? By: Wayne Parham on Sun, 21 March 2010 12:31
		Re: Double thickness front? By: BigmouthinDC on Sun, 21 March 2010 15:12
		Re: Double thickness front? By: Wayne Parham on Sun, 21 March 2010 20:24
		Re: Double thickness front? By: Infrasonic on Wed, 24 March 2010 01:05
		Re: Double thickness front? By: Wayne Parham on Wed, 24 March 2010 10:12

Previous Topic:	Info request about Pi-one/two and subs
Next Topic:	Speaker Plans Please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jun 01 21:48:46 CDT 2024