AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 1-Pi/2-Pi (Subjective Qualities)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 1-Pi/2-Pi [message #61702 is a reply to message #61673]

Sun, 10 January 2010 13:49

RDLewis
Messages: 15
Registered: September 2009

Chancellor

Thanks again Wayne.

Like yourself, I have found Martin King very generous with his help and advice, and followed his website and debates on the various forums. He often mentioned that reflex boxes would morph into TL's as the length increased! With ML TQWT's he adviced me to use the ported box worksheet to finalise the design as the port position could be accounted for.

So you both seem to be coming from the same direction. Good to know that clever minds can think alike.

As I mentioned in my previous message do you have any frequency impedance charts available for the "2"

Roy

Report message to a moderator

[Message index]

		1-Pi/2-Pi By: RDLewis on Tue, 05 January 2010 16:58
		Re: 1-Pi/2-Pi By: Wayne Parham on Tue, 05 January 2010 18:36
		Re: 1-Pi/2-Pi By: Wayne-o on Tue, 05 January 2010 19:21
		Re: 1-Pi/2-Pi By: RDLewis on Thu, 07 January 2010 16:00
		Re: 1-Pi/2-Pi By: Wayne Parham on Fri, 08 January 2010 09:03
		Re: 1-Pi/2-Pi By: Matts on Thu, 07 January 2010 20:48
		Re: 1-Pi/2-Pi By: RDLewis on Sun, 10 January 2010 13:49
		two Pi tower response and impedance charts By: Wayne Parham on Sun, 10 January 2010 15:12
		Re: two Pi tower response and impedance charts By: RDLewis on Mon, 11 January 2010 07:04
		Re: 1-Pi/2-Pi By: RDLewis on Thu, 14 January 2010 08:09

Previous Topic:	Pi 2 plans
Next Topic:	4Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 15 11:19:49 CDT 2024