Home » Sponsored » Pi Speakers » What solid filler for Theater 4 cabs...
Re: Altering dimensions [message #53005 is a reply to message #53004] Tue, 23 December 2008 12:16 Go to previous messageGo to previous message
jeff p is currently offline  jeff p
Messages: 16
Registered: May 2009
Chancellor
thanks, that helps.
looks like the main concern is floor bounce then.

i was thinking going close to 3.5 to 4 cubic ft. at 40hz...maybe 32"x17"x14" which i think would be approaching 3.5ft internal volume.
at that height the drivers would probably be 5-6" higher but spaced the same distance apart.
this is assuming the omega or the JBL would fit on a 17" baffle.

do you think there would be any noticeable effects to the midrange going to a 4ft enclosure if the driver spacing is kept the same and the drivers are no more than 6" higher than your plans for the pro cabinet.




 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Seven- Pi vs Eight- Pi ?
Next Topic: JBL 2446 & 2226 in a Corner Horn Design
Goto Forum:
  


Current Time: Mon May 13 14:51:48 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest