AudioRoundTable.com: Pi Speakers » Lab 12 push pull sub

Home » Sponsored » Pi Speakers » Lab 12 push pull sub

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Lab 12 push pull sub [message #51971]

Thu, 03 April 2008 00:13

Roland Gama
Messages: 38
Registered: May 2009

Baron

Playing around with Bass Box Pro- A pair of Lab12's modelled in a push-pull sealed enclosure (non-isobaric) gives an spl of about 120db at 800 watts at about 100 hertz and an F3 around 43 hz with a moderately damped enclosure of 2 cubic feet.

How would this system load a room size of 24x24 sq. feet at about 500 watts? Will one do or a pair of the above be necessary for deep punchy and fast bass?

Report message to a moderator

[Message index]

		Lab 12 push pull sub By: Roland Gama on Thu, 03 April 2008 00:13
		Direct radiating push-pull sub By: Wayne Parham on Thu, 03 April 2008 12:19
		12Pi push-pull sub photo By: Roland Gama on Fri, 04 April 2008 00:08
		Elephant in the house By: Wayne Parham on Fri, 04 April 2008 12:47
		Re: Elephant in the house By: Roland Gama on Fri, 04 April 2008 23:55

Previous Topic:	Seven mid encloser
Next Topic:	final 4pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 16 05:55:25 CDT 2024