AudioRoundTable.com: Pi Speakers » Foolin' around with the RS SPL meter

Home » Sponsored » Pi Speakers » Foolin' around with the RS SPL meter

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Foolin' around with the RS SPL meter [message #51670]

Sat, 05 January 2008 04:23

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Took some SPL readings at 1 meter between the speakers with the Stereophile test CD with the meter set at "C" weighting 'slow', 80dB.

Using the corrections on the Audiogon board by Sean:

1k 75dB
200 77
160 79.5
125 81.5
100 84
80 83.5
63 79.5
50 77.5
40 76.5
25 75

Ambient noise level seems to be about 50dB. The increase between 80 and 125 Hz is at a point a little higher in the spectrum than I would have thought. +9dB at 100 Hz is a little odd? Room is 15x28x8 with lots of stuff in it.

Does any of this mean anything?

Report message to a moderator

[Message index]

		Foolin' around with the RS SPL meter By: Bill Epstein on Sat, 05 January 2008 04:23
		Re: Foolin' around with the RS SPL meter By: Wayne Parham on Sat, 05 January 2008 09:37
		Re: Foolin' around with the RS SPL meter By: Bill Epstein on Sat, 05 January 2008 09:48
		Infrasonic bass By: Wayne Parham on Sat, 05 January 2008 10:27
		Re: Infrasonic bass: WOW! That's an eye-opener!* By: Bill Epstein on Sat, 05 January 2008 10:54

Previous Topic:	12Pi v2
Next Topic:	Hey, Bill Epstein Any info on your 4pi Pros?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 08:11:35 CST 2024