AudioRoundTable.com: Pi Speakers » Pi Sevens up and running!

Home » Sponsored » Pi Speakers » Pi Sevens up and running!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Easy to add Post-assembly Bracing [message #51331 is a reply to message #51327]

Thu, 09 August 2007 11:04

Skip Pack
Messages: 51
Registered: May 2009
Location: Hollister, California

Baron

I've used 1" 'dowels' several times -- available from Home
Depot. Cut them to length, see if you can straighten them
into position, if not sand the ends slightly and try again.
Once you have a fit, take them out, smear glue on both sides
and put them back. Once you see/feel what's vibrating, you
get a pretty good idea about where to put them.

Skip

Report message to a moderator

[Message index]

		Pi Sevens up and running! By: Tim Barnes on Tue, 07 August 2007 12:46
		Re: Pi Sevens up and running! By: Wayne Parham on Wed, 08 August 2007 09:33
		Re: Pi Sevens up and running! By: Tim Barnes on Wed, 08 August 2007 11:47
		Re: Pi Sevens up and running! By: Wayne Parham on Wed, 08 August 2007 12:26
		Re: And what does wifey think of the R-19? By: IRS on Wed, 08 August 2007 18:29
		Room treatments By: Wayne Parham on Thu, 09 August 2007 13:24
		Re: Hardwood floor By: Tim Barnes on Thu, 09 August 2007 18:09
		Re: Hardwood floor By: j.luis on Thu, 09 August 2007 19:28
		Re: Hardwood floor By: Tim Barnes on Thu, 09 August 2007 19:46
		Re: Super-tweeter By: Tim Barnes on Thu, 09 August 2007 18:13
		Re: Super-tweeter By: dB on Mon, 13 August 2007 10:16
		Easy to add Post-assembly Bracing By: Skip Pack on Thu, 09 August 2007 11:04
		Re: Easy to add Post-assembly Bracing By: Tim Barnes on Thu, 09 August 2007 18:15
		Re: Easy to add Post-assembly Bracing By: Skip Pack on Fri, 10 August 2007 08:27
		Re: Pi Sevens up and running! By: Tim Barnes on Fri, 10 August 2007 00:29
		Re: Pi Sevens up and running! By: Wayne Parham on Fri, 10 August 2007 09:32
		Re: Pi Sevens - almost finished! By: Tim Barnes on Tue, 14 August 2007 01:13
		Hey Tim. By: j.luis on Thu, 16 August 2007 11:11
		Re: Hey Tim. By: Tim Barnes on Thu, 16 August 2007 15:47

Previous Topic:	JBL 2416
Next Topic:	what design can i throw 8 jbl 2206J's in?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 15 02:07:05 CDT 2024