Home » Sponsored » Pi Speakers » Two Pi towers with HiVi RT2C-A Planar transducers...?
Two Pi towers with HiVi RT2C-A Planar transducers...? [message #51251] Sun, 08 July 2007 14:05 Go to previous message
Eric89GXL is currently offline  Eric89GXL
Messages: 4
Registered: May 2009
Esquire
I recently replaced the old-school piezoelectric tweeters in my 2Pi towers with the new DX-25's. The imaging is improved, but the tweeters seem to be at a lower level than the woofers now. The highs might be too subtle for me. I found this tweeter on parts express:

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=297-406&ctab=2#Tabs

Wayne or others, how do you think this would stack up as a replacement tweeter? Seems like it would work well given the efficiency. I'm curious how I'd have to modify the crossover---maybe go to a second-order on the tweeter?

Also, Wayne, do you have a spec sheet available for the Eminence drivers in case I decide to redesign the x-over? I know I have one of the "newer" versions of the woofers that needed the inductor to tame the midrange honk.

Eric


 
Read Message
Read Message
Read Message
Previous Topic: De-ringing my Pi Seven cabinets
Next Topic: length of port for pi2 towers
Goto Forum:
  


Current Time: Fri Mar 29 04:48:05 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest