AudioRoundTable.com: Pi Speakers » how about open baffle for 12" midbass driver?

Home » Sponsored » Pi Speakers » how about open baffle for 12" midbass driver?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

how about open baffle for 12" midbass driver? [message #44291]

Fri, 02 April 2004 21:51

adkins
Messages: 15
Registered: May 2009

Chancellor

any comments on an open baffle design for Beyma 12G320 driver to be used from 100hz-1.2khz or 200hz-1.2khz?
How about a 60liter enclosure?

I have already found the official T/S for this driver as follows:
BEYMA 12G320 T/S
QTS= .16
Vas=152liter
Fs=37hz
Re=5.8ohms
Le=.7
Xmaxx=1.5mm
Z=8
Qms=9.07
Qes=.165
SPL=100db
Pe=150w
BL=none supplied
Dia=12"
Sd= 530 (not sure what this is, mm or inch)

THANKS IN ADVANCE for any advise!!

Report message to a moderator

[Message index]

		how about open baffle for 12" midbass driver? By: adkins on Fri, 02 April 2004 21:51
		Re: how about open baffle for 12" midbass driver? By: Wayne Parham on Sat, 03 April 2004 09:43

Previous Topic:	Subwoofer project update
Next Topic:	subwoofer who do I pay?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 16 17:50:59 CDT 2024