| |
105 Search Results Found |
| 1 |
Forum: Pi Speakers «»
Posted on: Fri, 02 June 2023 10:53 «»
By: Wayne Parham
Re: Jbl 2226h and 2447h
I've sent plans to your email address.
The horn you'll need is the Pi Speakers H290C waveguide/horn. It's the only part you can't buy locally because we're the only company that makes it. All the other parts you can purchase anywhere.
You don't h...
|
| 2 |
Forum: Pi Speakers «»
Posted on: Sat, 24 September 2022 15:51 «»
By: Wayne Parham
Re: Subwoofer amp and crossover
I would suggest using a flanking sub approach. Do a search for "flanking subs" here and on the internet at large. Lots of good information about it.
To describe in a nutshell, flanking subs are basically stereo subs with specific placement...
|
| 3 |
Forum: Measurement «»
Posted on: Tue, 30 August 2022 13:46 «»
By: Wayne Parham
Re: Crossover slopes
It's really just a guess without measurements. But it does sound like they intended to run the subwoofer up pretty high to match their mains. So it might just work as a flanking sub.
One thing you can do without measurements is to run the sub by its...
|
| 4 |
Forum: Pi Speakers «»
Posted on: Mon, 22 August 2022 18:33 «»
By: Wayne Parham
Re: My 3π adventure
I like symmetrical multisubs, which is a Welti arrangement. You can use such an arrangement and also include flanking subs.
Place the mains with flanking subs outboard. They are just a little behind, beside and below the mains. They are stereo subs...
|
| 5 |
Forum: Pi Speakers «»
Posted on: Wed, 23 December 2020 19:19 «»
By: ooheadsoo
Flanking subs with multi-sub optimizer, and other questions
I intend to mate my mains (ported, tuned around 50hz) with an old Hsu Research vtf-2 (ported, tuned around 25hz). For use as flanking subs, I currently have two Dayton RSS265HF-8 woofers on each side, each pair of woofers in a Linkwitz specified W-frame c...
|
| 6 |
Forum: Speaker «»
Posted on: Mon, 16 November 2020 17:24 «»
By: Barryso
Re: Futzing with vibration control
Johnnycamp, haven't seen anything about your 7's lately. Did you get the doghouses done? Are you still running the Oddwatt amps?
Wayne, I have to apologize, we've been through this problem before but it's been a few years and it completely slipped my...
|
| 7 |
Forum: Pi Speakers «»
Posted on: Wed, 23 September 2020 14:51 «»
By: Wayne Parham
Re: 3Pi and 4Pi Plans Request
I think if you peruse the Pi Speakers FAQ and do searches here in the forum, you'll probably find all the answers to any questions you might have.
In particular, you might want to read the H290C Horn/Waveguide thread. It discusses the benefits of tha...
|
| 8 |
Forum: Pi Speakers «»
Posted on: Sun, 24 May 2020 10:59 «»
By: Wayne Parham
Re: Horn loaded Corona Build
If you search here for "flanking sub crossover" you'll find lots of threads where we discuss different crossovers and amps. Some are plate amps and some are separate crossovers and amps. But the truth is, you're right, that most plate amps of...
|
| 9 |
Forum: Pi Speakers «»
Posted on: Sat, 16 May 2020 14:36 «»
By: Wayne Parham
Re: Horn loaded Corona Build
There are lots of other great build threads too. Some people have built some really great looking home theaters. Some have made super nice dinner theater installations. And there are plenty of great finishes from various builders too. Almost too many...
|
| 10 |
Forum: Pi Speakers «»
Posted on: Thu, 26 March 2020 16:05 «»
By: Barryso
Re: Low Pass
Hi Rusty,
Yes, the "subs" are two way monitors that go low. A set of purpose built subs would do likely do better, as they'd have more surface area, but the speakers sound good and don't take up a lot of room.
Been listening to a lot of mu...
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
