AudioRoundTable.com: Pi Speakers » Compensation circuit for 16-Ohm JBL 2426/2370

Home » Sponsored » Pi Speakers » Compensation circuit for 16-Ohm JBL 2426/2370

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Compensation circuit for 16-Ohm JBL 2426/2370 [message #49361]

Mon, 24 April 2006 08:34

ccvogel
Messages: 17
Registered: May 2009

Chancellor

I decided to bi-amp and use a series cap on my 2426/2370 rather than using an active crossover. What values of cap and resistor should I use to compensate for the falling CD HF response if my tweeter is 16-Ohm?

Report message to a moderator

Re: Compensation circuit for 16-Ohm JBL 2426/2370 [message #49365 is a reply to message #49361]

Mon, 24 April 2006 18:24

Wayne Parham
Messages: 18838
Registered: January 2001

Illuminati (33rd Degree)

I think you'll find the information you need in the post below:

16 ohm tweeter crossover values

Report message to a moderator

Wayne, thanks very much! [nt] [message #49366 is a reply to message #49365]

Mon, 24 April 2006 20:09

ccvogel
Messages: 17
Registered: May 2009

Chancellor

[nt]

Report message to a moderator

Re: Compensation circuit for 16-Ohm JBL 2426/2370 [message #49368 is a reply to message #49365]

Tue, 25 April 2006 07:11

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Wayne, I've been meaning to ask you this for a while. Why do you graph freq in linear instead of log scale?

Report message to a moderator

Re: Compensation circuit for 16-Ohm JBL 2426/2370 [message #49369 is a reply to message #49368]

Tue, 25 April 2006 11:15

Wayne Parham
Messages: 18838
Registered: January 2001

Illuminati (33rd Degree)

The log scale in Spice is just more dificult to view. The frequencies of interest are shifted and too close together in log scale.

Report message to a moderator

Previous Topic:	10" horn loading
Next Topic:	Need some speaker advice Wayne (and others)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Mar 01 16:10:48 CST 2025