Home » Sponsored » Pi Speakers » Pi 8
Pi 8 [message #44513] Tue, 27 April 2004 13:36 Go to next message
Zeno is currently offline  Zeno
Messages: 122
Registered: May 2009
Master
hi wayne,

have you put the design on paper yet? i think the pi 8 will be very interesting?


Z gabriel

Re: Pi 8 [message #44517 is a reply to message #44513] Tue, 27 April 2004 16:47 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18755
Registered: January 2001
Illuminati (33rd Degree)

I haven't finished the drawings, but it's really a matter of icing on the cake. The horn is done, the box tuning is done and the crossover is done. The prototype measured and sounded very nice. Now it's just a matter of packaging and aesthetics. If you have the Alpha 10 driving the midhorn, backloaded with 5.5ft3, port tuned to 40Hz and if you are using the PSD2002 compression horn and crossover mentioned in the "8 Pi with Alpha 10", you've built an eight π loudspeaker.

Just shape it like shown below so it fits nicely in a corner but also fits snug against a wall and you have it. It will be approximately 24" wide and 36" tall, have the tweeter horn on top, tweeter horn mouth edge flush with the baffle and with the midhorn edge. It will work best in corners, but is also quite nice against the wall or out away from walls; It isn't particularly sensitive to placement but imaging is better in corners and response is a little flatter too..

eight π Loudspeaker

Re: Pi 8 [message #44520 is a reply to message #44517] Wed, 28 April 2004 07:39 Go to previous messageGo to next message
Russellc is currently offline  Russellc
Messages: 397
Registered: May 2009
Illuminati (1st Degree)
Wayne,
When plans are finished, will there be a Higher end JBL version,
and if so, what driver would be recommended? I have had no luck whatsoever in finding the suggested driver for the audiophile Pi's
midrange, I believe it calls for the 2123?

thanks in advance, Russellc

Re: Pi 8 [message #44521 is a reply to message #44520] Wed, 28 April 2004 07:56 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18755
Registered: January 2001
Illuminati (33rd Degree)

The eight π is designed specifically for the Eminence Alpha 10. The Alpha 10 has a couple things going for it besides its T/S specs, and those are its low cost and its ability to work well with low-power SET amps. I don't know of any other suitable replacement drivers for the eight π right offhand, but there might be some, it would just take some looking around. I don't think JBL makes anything with compatible T/S specs though.

As for the Audiophile seven π's, you can use a JBL 2012 instead of the 2123. The 2123 was nice for a while because JBL was selling a bunch of them at their online "Tent Sale." Those are gone though, so now you must purchase the newer version 2012, which isn't discounted like the Tent Sale 2123's were.


Re: Pi 8 [message #44568 is a reply to message #44517] Tue, 04 May 2004 12:13 Go to previous messageGo to next message
Zeno is currently offline  Zeno
Messages: 122
Registered: May 2009
Master
thanks wayne,

anyway i am not good at running number, i will just wait for the drawing , i have already bought the alpha 8 and i can try the psd 2002 on on pi 4, if the pi 8 are really good then i will buy another pair of the psd 2002 so both the pi 4 & 8 will be ready to form my DTS system

thanks, please keep me inform.

gabriel

Re: Pi 8 [message #44574 is a reply to message #44568] Tue, 04 May 2004 14:49 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18755
Registered: January 2001
Illuminati (33rd Degree)

Will do.


Previous Topic: Pictures of my projects
Next Topic: Decisions, Decisions!
Goto Forum:
  


Current Time: Thu Aug 29 22:16:55 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest