AudioRoundTable.com: Pi Speakers » Do I have to use the PSD3003 with 18" drivers?

Home » Sponsored » Pi Speakers » Do I have to use the PSD3003 with 18" drivers?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Do I have to use the PSD3003 with 18" drivers? [message #42870]

Sat, 01 November 2003 04:48

drguayo
Messages: 84
Registered: May 2009

Viscount

Would they work with the Omega 15" using the 800 hz crossover? and which horn do I then use?

thanks
craig.

Report message to a moderator

Re: Do I have to use the PSD3003 with 18" drivers? [message #42872 is a reply to message #42870]

Sat, 01 November 2003 10:49

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

There's no reason why you have to use it with an 18" woofer, but one of the big advantages of going with a larger CD is a lower crossover frequency, which means you can use a larger diameter woofer with more displacement to fill in the bottom end. The other mode of thinking is to impliment them like you would a 1" exit compression driver and reap the benefits of reduced IM distortion and more potential from the larger driver.

Adam

Report message to a moderator

Previous Topic:	Two Pi Towers are HUGE!
Next Topic:	How to downsize a cabinet's volume?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 04:15:46 CST 2024