AudioRoundTable.com: Pi Speakers » has anyone heard of madison speakers??

Home » Sponsored » Pi Speakers » has anyone heard of madison speakers??

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

has anyone heard of madison speakers?? [message #41710]

Thu, 26 June 2003 19:09

Don17
Messages: 20
Registered: May 2009

Chancellor

On the internet, I stumbled upon this webesite where the drivers look almost look like JBL and Ev's. Steelsound.com sells their products really cheap!!!!!!!!!! I mean something like a cast frame 21" driver for only 150 dollars!!!!!!!!! Do you think that madison speaker is just another one of those speakers whose specs are over rated for the cost?? Has any one of you used their line of drivers and found them worth it???

madison speakers

Report message to a moderator

Re: has anyone heard of madison speakers?? [message #41729 is a reply to message #41710]

Sat, 28 June 2003 03:23

macyar@attbi.com
Messages: 2
Registered: May 2009

Esquire

Hi, I'm new to Pi Speaker Forum and haven't received my confirmation by mail yet, however, I wanted to tell you of my experience w/Madison Speakers. They make their own drivers and they are quality! The company is going through a transition now, however, their speaker designs, components, and dedication to quality is very high! They cut-out the middle man and savings are spectacular! I own 2 of their 10" bass drivers and they are superb! Just because they are made in Loveland, CO don't discount their high quality! Thanks for the opportunity to sound off about a quality company and drivers I have been dealing with for many years!
Michael A. Collins

Report message to a moderator

Re: has anyone heard of madison speakers?? [message #41734 is a reply to message #41729]

Sat, 28 June 2003 11:35

Don17
Messages: 20
Registered: May 2009

Chancellor

do you think the one of the executioner 18s would be ok for me for live sound in auditoriums????

Report message to a moderator

I'm about to do a design using the Knight 10" on Pialign. [message #41739 is a reply to message #41710]

Sat, 28 June 2003 23:31

-3db
Messages: 7
Registered: May 2009

Esquire

Yes, heard of them, and amazed at the price/quality ratio.

So, have I built, or bought anything yet: No.

But I beginning the design, and will let you know my results w Madison, and Steel Sound, who carrys their line

Good Luck,
Sincerely,
-3db

Report message to a moderator

Re: has anyone heard of madison speakers? [message #41745 is a reply to message #41734]

Sun, 29 June 2003 12:07

macyar@attbi.com
Messages: 2
Registered: May 2009

Esquire

Hi Don, after checking on both the Executioner and ExecutionerX drivers both would do well for your needs! The cabs/enclosure is the key for the 2 drivers. Standard reflex (i.e.,port/slot) or bin loading might be best for Executioner 18. The Executioner 18X would make a lethal sub-woofer if your needs were so inclined! Scoop bins or cabs would be another excellent answer for live and/or auditorium size venues. You get the benefits of both horn loading and direct radiation. These 18's can take constant amounts of high power w/o failure and are solidly built! I hope this info. has been of help Don and God bless!

Report message to a moderator

Re: has anyone heard of madison speakers?? [message #42114 is a reply to message #41729]

Wed, 06 August 2003 09:12

JR313
Messages: 1
Registered: May 2009

Esquire

Hi, I stumbled on this thread, I have had nothing but negative experiences with madison, speaker hole, sirus one, leigion sound, all that are based out of loveland, CO. they do not make the drivers, they are all imported from overseas. Nippon is the company I believe. www.nipponamerica.com I have purchased several Items from them including 4 15" knights that droped the magnents when the box got tipped over. The're products were also mis represented by some of their retailers, and instead of an 3/4" all Plywood box you got a 5/8" particle board piece of junk. They didn't even have crossovers just a 47ohm resistor in series with the HF driver to attenuate it. I would have to disagree that their products are high quality, based on my expierience. However for the price you are gettig what you payed for.

Report message to a moderator

Previous Topic:	Wanna hear something funny?
Next Topic:	Amazing new bass contour control

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 10:51:41 CST 2024