Home » Sponsored » Pi Speakers » Need a small, practical, 101dB 2-way?
Need a small, practical, 101dB 2-way? [message #39723] Sat, 04 January 2003 16:24 Go to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)

The latest and greatest "Project" speaker from JBL, ...K2.
With the 811b horns I stole from Speakerman and another pair of 2226j's, I think I might get this nuts.
What the heck, you build'm one board at a time.
Hey Wayne, it's just a pair of Pro4's stacked with a horn in the middle, right? No Hay Problema. 250 lbs each. I might need a little help getting'em into the Bumstead, or whatever that hotel in Lima is called.

Re: Need a small, practical, 101dB 2-way? [message #39724 is a reply to message #39723] Sat, 04 January 2003 18:33 Go to previous messageGo to next message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
TillE,
I am not sure about the 101db sensitivity on this one, check out the foam surrounds. read the posts concerning dual 15" formats and cancellation on the JBL 4648's at around 817hz, I believe SamPayne Jr went over this subject previously.
Ron
Re: Need a small, practical, 101dB 2-way? [message #39729 is a reply to message #39723] Sun, 05 January 2003 07:51 Go to previous message
LuxmanLover is currently offline  LuxmanLover
Messages: 164
Registered: May 2009
Master
A pair of 2235H's would get you closer to the design than the 2226J's, at least if you want to get all the way down that is. I think these babies are around $12,000.00 a piece (not pair).
Kelly
Previous Topic: Port variation for doubled woofer
Next Topic: Thermionic Pi 7 Cornerhorns
Goto Forum:
  


Current Time: Sun Jul 14 02:58:42 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest