Home » Sponsored » Pi Speakers » Isobaric with a pair of Eminenece Beta 15's.
Isobaric with a pair of Eminenece Beta 15's. [message #37114] Sun, 30 June 2002 03:56 Go to next message
Andy.G is currently offline  Andy.G
Messages: 20
Registered: May 2009
Chancellor
about 120L tuned just about 40Hz, purpose - PA sub.

What chance you reckon Wayne?

Re: Isobaric with a pair of Eminenece Beta 15's. [message #37115 is a reply to message #37114] Sun, 30 June 2002 10:57 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

Isobaric will increase moving mass and motor, but I'm not sure Beta 15's are the kind of speaker you'd want to run that way.

Re: Isobaric with a pair of Eminenece Beta 15's. [message #37116 is a reply to message #37114] Sun, 30 June 2002 14:21 Go to previous messageGo to next message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Should play fairly loud, but the box peaks nearly 5db at 62 hz.

I don't know what they cost, but I imagine you could get a single Kappa 15lf for the price of two of the betas. Run it five cubes (140 litres) tuned to 40 Hz with a pair of 4" ports. You'll get great output, and this thing goes damn *low* all things considering... To me it sounds flat to 30 Hz almost. It's one of the best low frequency drivers I have found from eminence that isn't too pricey and will run in a pretty small box.

You'll get more output than the betas (same sensitivity, but no power compression) with flat response, good sound and surprisingly deep bass.

Adam

Re: Isobaric with a pair of Eminenece Beta 15's. [message #37118 is a reply to message #37116] Sun, 30 June 2002 16:11 Go to previous messageGo to next message
Andy.G is currently offline  Andy.G
Messages: 20
Registered: May 2009
Chancellor
Trouble is that I have a pair of bet 15's sitting on the shelf, just trying to figure how to use them best ! Thanks for the suggestion though :-))
Re: Isobaric with a pair of Eminenece Beta 15's. [message #37119 is a reply to message #37118] Sun, 30 June 2002 16:31 Go to previous message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Oh ok, I kinda figured that.

Things will be a bit better if you use a larger box... Like at least 5-6 cuft.

Adam

Previous Topic: Passive Radiator versus Port
Next Topic: plans for studio 2 pi
Goto Forum:
  


Current Time: Sat Nov 30 19:36:38 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest