AudioRoundTable.com: Pi Speakers » If my calculations are correct.....

Home » Sponsored » Pi Speakers » If my calculations are correct.....

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

If my calculations are correct..... [message #36848]

Wed, 12 June 2002 14:53

Mattias S
Messages: 11
Registered: May 2009

Chancellor

...the panels for the 1 Pi is ~16mm:s thick right ?

1 inch = 25,2mm
5/8inch = 15,75mm

Regards // Mattias S - Sweden

Report message to a moderator

Please Mr Bush, can we have metrics like the big countries have? [message #36851 is a reply to message #36848]

Wed, 12 June 2002 15:24

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

Using .625 as 5/8, 15.875mm, to be exact.
It's 2001 and we still have feet and inches, By Jingo!

Report message to a moderator

Thanks Till E [message #36852 is a reply to message #36851]

Wed, 12 June 2002 15:41

Mattias S
Messages: 11
Registered: May 2009

Chancellor

Going for the 16mm then. Hope i got some mdf left from my last project =)

Regards // Mattias S - Sweden

Report message to a moderator

2002, Till E. [message #36856 is a reply to message #36851]

Thu, 13 June 2002 02:58

JLapaire
Messages: 156
Registered: May 2009

Master

I know, it changes so fast...

John

Report message to a moderator

Re: 2002, Till E. [message #36857 is a reply to message #36856]

Thu, 13 June 2002 05:19

Garland
Messages: 269
Registered: May 2009

Grand Master

I just got back from visiting college friends in Florida and from the good time we had you'd think it was still 1970!

Report message to a moderator

Re: FWIW: Congress passed a law making the Metric System as the USA's Standard... [message #36981 is a reply to message #36851]

Wed, 19 June 2002 09:27

steve jones
Messages: 3
Registered: May 2009

Esquire

...in 1866.

You can blame Andrew Johnson for not enacting it. ;-)

Report message to a moderator

Previous Topic:	Absolutely amazing wood finish
Next Topic:	That's right: The Olsen Twins Countdown Clock!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 04:15:05 CST 2024