AudioRoundTable.com: Pi Speakers » Port size for 4 Pi with JBL 2205 driver

Home » Sponsored » Pi Speakers » Port size for 4 Pi with JBL 2205 driver

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Port size for 4 Pi with JBL 2205 driver [message #36777]

Wed, 05 June 2002 07:23

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Wayne,
Sometime back when I first found this forum, we discussed using JBL 2205's for 4 Pi project. I have 3677's with JBL 2226J's that I like, but this project with the 2205's will be combined with Altec 288/311-60 combo @ 800 hz. I already have all the crossover info taken care of, but I think you said 2205 in 2.1 cubic ft enclosure ported to 58hz. Please let me know the port dimensions. I know this is probably old data handwritten, so I will be patient if you need time to look up. Once again, Thanks for the assistance. I will have pic's posted for this one when completed as I think there are some folks out there with 311-60 Altec horns powered with Altec 288 drivers (1.4" throat).
Regards, Ron

Report message to a moderator

Re: Port size for 4 Pi with JBL 2205 driver [message #36780 is a reply to message #36777]

Wed, 05 June 2002 09:33

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

You're right - My plans for 2205's are handwritten. But there is a PID file for the JBL2205 in PiAlign. It calls for a 6.1" dia port that's 5.6" long. Alternately a 5.6" long rectangular port of 4" x 7.25" can be used. You could also use a 3" diameter hole cut into a 1" baffle, with no duct added.

Report message to a moderator

Previous Topic:	Another set of 4 pis - my first
Next Topic:	Premium Stage Four Pi's Done!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 02:38:22 CST 2024