Hello. I don't know if you are the person who moderates this forum or if you are actually the person behind these Pi speakers.
Please forgive my not knowing. In any event I think you may be able to answer my question.
I do not see the Impedances listed in the areas where you give the specs of the individual speakers. Have I missed something here? Are they all the same?
I suspect I just can't find the right place to tell me. It is an important factor to me and I suspect many others.
If you could help me out here I would appreciate it. Thank you.
Wayne Parham Messages: 18791 Registered: January 2001
Illuminati (33rd Degree)
Eight ohms is the advertised impedance of all motors used in π Speakers. Advertised impedance is listed on the specifications sheet for each motor on the π Speakers website. But advertised impedance is not a terribly good indicator of the actual impedance of a motor. So impedance at resonance or "Zmax" is also shown, which is a critical determiner of performance on amplifiers having low damping factor like SET amps without negative feedback often have.
Thanks for responding Mr. Parham. I think you answered my questions, but I have one more.
What is a piezoelectric? Actually I don't need to know much about it, just how does it effect the Inpedence of the speaker as a whole? Does it have any resistance on it's own?
Wayne Parham Messages: 18791 Registered: January 2001
Illuminati (33rd Degree)
A piezoelectric device is one that uses a quartz crystal as a motor/generator. You can get exact specifications, including the impedance curve, at www.PiSpeakers.com/KSN1041.htm.
Mr. Parham, you seem to be a wealth of knowledge here at this forum. Congratulations to you for your knowledge and your willingness to share it with others. Thank you for your help to me.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
