AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2226H vs Delta 15

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

2226H vs Delta 15 [message #34769]

Wed, 16 January 2002 06:35

Frode
Messages: 49
Registered: May 2009

Baron

In an earlier post you wrote (about the 2226H):

You can make the cabinet anything from about 2.5 cubic feet to 5 cubic feet, and have tuning anywhere from about 38Hz to maybe 50Hz, and still have an acceptable speaker.

I know that you recommend PiAligned cabinets, but how would a 2226H in a 4.5-5 cu.ft. box tuned to 40-42Hz perform compared to a 4 Pi with the Delta 15?

By the way, my Beymas drivers sounds real nice. I still haven't changed the filter from the MD2001, so I reckon they'll get even better. I've also bought a set of Oris horns. I can't afford the Lowther drivers for these yet, so I've decided to order a pair of Beta 8CX instead. My 4Pi will be used for bass.

Frode

Oris 200

Report message to a moderator

Re: 2226H vs Delta 15 [message #34772 is a reply to message #34769]

Wed, 16 January 2002 13:48

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

I would prefer the JBL 2226H over the Delta 15 even if the box chosen for each woofer were tuned max flat. The reason is the JBL 2226 has a shorting ring and so it distorts less. But beyond that, a JBL 2226 is perfect in a 2.5ft3 - 5.0ft3 while this size is much too small for a Delta 15. The JBL will be nice and smooth in a 4.5ft3 box but the Delta 15 will be underdamped. So I'd go with the JBL's.

Report message to a moderator

Previous Topic:	Rear ports for PA speakers?
Next Topic:	exteme bass drowning out treble and midrange

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 11:17:58 CST 2024