Home » Sponsored » Pi Speakers » 6th order "quality"
6th order "quality" [message #34547] Wed, 26 December 2001 12:06 Go to next message
claudius is currently offline  claudius
Messages: 1
Registered: May 2009
Esquire
Hi,

I'm trying and trying simulation for sound reinforcement sub-woofer enclosure. I do several simulation with a promising driver (18 inchs), but I cannot decide in between a usual bass-reflex (about 120 Litres), or a 6th order band-pass speaker, with almost the same size. In theory, I got nearly 3dB more on the 50 to 100 Hz range (the range I'm interreset about) with the band pass, but is that reallity ? what about the sound ?? does it sound like a drum, or like a real speaker ?? I mean, does it have the bad habits of shiffting the frequency near its hown resonance frequency ?? (I hear this on some PA system, and I really don't want something like this, sound like every bass notes are the really same)



Re: 6th order "quality" [message #34550 is a reply to message #34547] Wed, 26 December 2001 14:49 Go to previous message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Well bandpass boxes really can't compete with ported or sealed for sound quality... So it depends on what your priorities are. You really can't go wrong with a good old ported box, if you want slightly more output, not as decent a sound and a built in crossover (a crappy one, mind you), then go bandpass.

Adam

Previous Topic: there really is a Santa Claus, and his name is
Next Topic: EL84PP/Seven Pi's
Goto Forum:
  


Current Time: Sun Dec 01 03:37:55 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest