AudioRoundTable.com: Pi Speakers » Need T/S for Eminence 55-785

Home » Sponsored » Pi Speakers » Need T/S for Eminence 55-785

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Need T/S for Eminence 55-785 [message #34327]

Wed, 05 December 2001 14:25

chrisR
Messages: 36
Registered: May 2009

Baron

Hi Folks,

I know I should join EA (eBay Anonymous), but I bought a 15"
driver that I need the T/S parameters for. Its an Eminence, but
not from the Greek line (Alpha, Beta, etc). The model number on
the magnet sticker is 55-785. It seems to be tuned pretty low and
has high Qms (flops around a lot). At one time I found a simple
web page loaded with driver specs, but I can't for the life of me
find it.

Thx, chris

Report message to a moderator

Re: Need T/S for Eminence 55-785 [message #34329 is a reply to message #34327]

Wed, 05 December 2001 16:16

Wayne Parham
Messages: 18711
Registered: January 2001

Illuminati (33rd Degree)

If it was originally sold by MCM Electronics, then Fs=18Hz, Vas=31cuft and Qts=0.35. Older drivers were made to order, and the T/S specs determined by the purchaser. Here's a chart of some of them: