| Piezo drivers and cross-overs [message #33580] |
Sun, 22 July 2001 04:56  |
Andy G
Messages: 68
Registered: May 2009
|
Viscount |
|
|
I've decided I will try to put together some sample x-os on my web site of crossovers for different driver combo's using piezo drivers. Included will be drivers used and x-o design.
I will put a couple on there of what I have done, and if its OK with Paul C, a couple of his as well. I am no guru with these, but I would like to act as a collecting point.
SO ! if anyone has any piezo x-os they would like to share, please email relevant information to me.I will also be expanding my PA speaker box pages with a bit of extra info for anyone who is interested. TIA
AG
|
|
|
|
| Re: Piezo drivers and cross-overs [message #33581 is a reply to message #33580] |
Mon, 23 July 2001 11:11  |
Paul C.
Messages: 218
Registered: May 2009
|
Master |
|
|
|
Fine with me, Andy... go ahead and post mine. OK, guys, don't laugh, I drew them with Paint in a hurry. But then again, I saw a site for spkr plans, looked worse than my doodlings on napkins in diners. Poor hand sketches on graph paper. The guy did not even use a ruler to draw staight lines. And most are so bad you can't figure them out. Hah! Please be aware that the resistor/cap in the woofer sections (Zobel, imp compensating) are computed for the particular woofer, you will have to recompute these for your woofer. Paul
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
