AudioRoundTable.com: Pi Speakers » Four Pi crossover question

Home » Sponsored » Pi Speakers » Four Pi crossover question

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Four Pi crossover question [message #33503]

Sun, 01 July 2001 11:29

James W. Johnson
Messages: 199
Registered: May 2009

Master

First off I must say that I really like you Wayne!,you are one of the nicest speaker guys I have dealt with on the internet. Thanks for sending me the Pi decals and Four Pi plans, I cannot wait unil the day that I apply the decals... I have it all worked out, this is sort of my speaker building ritual.....

1. build the enclosures
2. finish the enclosures
3. build the crossovers
4. mount the drivers and crossovers
5. set up the speakers where I plan to use them
6. unplug my telephone
7. pour myself a cool drink
8. pick out a CD
9. apply the Pi decals
10. Listen to them for the first time.

For the tweeter circuit on my Four Pi crossovers, instead of using 16ohm 10watt resistors I would like to use 8ohm 100watt resistors for R1 and R2. two in series for each one. do you see any problems with this?

Report message to a moderator