Home » Sponsored » Pi Speakers » wayne, check these woofers out
wayne, check these woofers out [message #33417] Wed, 13 June 2001 17:29 Go to next message
replay is currently offline  replay
Messages: 284
Registered: May 2009
Grand Master
hi wayne, i just purchased a surplus of eminence 15" woofers. look at the specs and see if they will work with any of your designs?

15" H.P SUBWOOFER
ACCORDIAN CLOTH SURROUND
3" KAPTON VOICE COIL-4 LAYER
95oz ceramic magnet

Re(ohms) 4.80 Fs(Hz) 38.52
Le(mH) 1.10 Mms(g) 92.80
Qm 8.82 Cms(mm/N) .1840
Qe .470 Rms(Ns/m) 2.5464
QT .450 Vas(L) 189.55
Xmax(mm) 4.80 Sd (cm^2) 856.34
BL(Tm) 13.59 EBP 82.00
EFF(%) 2.22 SPL(dB) 95.50

the story behind these are that they were made for klipsch but the impedance posed a problem, anyhow those on the forum who want some can have them for $80.00 a piece.

thanks, george

Re: wayne, check these woofers out [message #33418 is a reply to message #33417] Wed, 13 June 2001 23:02 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)
From the looks of the numbers, I think those woofers would work pretty well in the Theater Series six Pi cornerhorn, with the woofer hole cut to fit, of course. Depending on how well damped cone flex is through the midrange, it might work well in the Theater three Pi too.
Previous Topic: My Sincere regards to Waynes Family
Next Topic: Pro Series 4 Pi questions.
Goto Forum:
  


Current Time: Fri Nov 29 18:52:37 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest