I'm wanting to swap the old speakers in my combo.Do the replacement have to match the old ones in watts/ohms exactly? I have a 120 watt combo with 2-120 watt/16ohm speakers that I usually run at 4 ohms in conjunction with a 2x12 extension cabinet with 2- 65watt/8ohm speakers. I only want to change the combos out, but am confused about what rating speaker I should get to use with & without th extension cab???
Wayne Parham Messages: 18737 Registered: January 2001
Illuminati (33rd Degree)
Usually amps are pretty tolerant of load impedance - up to a point. Tube amps sometimes don't like high impedance loads and transistor amps don't like low impedance loads. Usually you have about a 0.5x to 2.0x "window" of values that will work, so if the amp is rated for 8Ω it is probably fine with loads from about 4Ω to 16Ω.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
