AudioRoundTable.com: Radio » atwater kent model 42

Home » Audio » Radio » atwater kent model 42

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

atwater kent model 42 [message #25975]

Sun, 04 November 2007 00:06

Trent Anderson
Messages: 1
Registered: May 2009

Esquire

All tubes light up - but no sound. I have an atwater kent speaker any ideas. i am goint to try a small speaket to see if it works.

I also need a tuning dial - ITs gone tmanwade@yahoo.com

Trent

Report message to a moderator

Re: atwater kent model 42 [message #25976 is a reply to message #25975]

Sun, 04 November 2007 15:31

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

Could be any number of things but I would replace the capacitors first. The capacitors in these things are usually bad, in fact, most times the tubes still work but the caps don't. Just replace every capacitor you see with a polypropylene cap of the same value. Chances are it will fire right up.

Report message to a moderator

Previous Topic:	Emud Stereophonic radio-phono console
Next Topic:	montgomery ward airline model 93wg-802c

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 04:20:23 CST 2024