Home » Audio » Radio » Need Radiola Model 17 Tuning Wheel
Need Radiola Model 17 Tuning Wheel [message #25697] Tue, 24 May 2005 22:12 Go to next message
Charlie S. is currently offline  Charlie S.
Messages: 2
Registered: May 2009
Esquire
I have acquired a Radiola model 17 with a broken tuning wheel. This is the pot metal wheel that goes on the shaft of the tuning condenser.
Since I have all the pieces of the old tuning wheel I'm wondering if I can just epoxy it back together and make this radio sing. Has anybody had any luck doing this? I think I would still want to get a replacement wheel in the long run if possible.

Re: Need Radiola Model 17 Tuning Wheel [message #25698 is a reply to message #25697] Wed, 25 May 2005 06:19 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18669
Registered: January 2001
Illuminati (33rd Degree)

Yeah, you could probably do that but I'd definitely find an old scrap radio to swap with. If you're lucky, you'll find one that has the pully attached with a set screw instead of being pressed on.


Previous Topic: atwater kent radio
Next Topic: Please Help Me Identify Freshman Model Number
Goto Forum:
  


Current Time: Thu Mar 28 06:32:43 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest