AudioRoundTable.com: Source » Loosing one channel of sound

Home » Audio » Source » Loosing one channel of sound

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Loosing one channel of sound [message #13689]

Mon, 30 June 2008 02:48

Roger
Messages: 1
Registered: May 2009

Esquire

Can sound one tell me what might cause one channel of sound to go out on a Rega PL 2 turntable. Is it more likely in my turntable or amp?

Report message to a moderator

Re: Loosing one channel of sound [message #13691 is a reply to message #13689]

Thu, 03 July 2008 14:39

Wayne Parham
Messages: 18677
Registered: January 2001

Illuminati (33rd Degree)

Could be anything. Here's an easy test to narrow down whether it's in the turntable or the amp: With the amplifier on and at a medium to low volume level, disconnect both channels from the turntable and plug in just the tip of the RCA plug on one channel. You should hear hum on that channel. Try this with both channels and if you hear hum on both sides, the amp is probably good. If so, check the wires to the cartridge and make sure they're not broken.

Report message to a moderator

Previous Topic:	Technics Direct Drive Automatic drop broken!
Next Topic:	Gemini TT02 DD - Slow Start

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Apr 23 11:21:42 CDT 2024