I am researching DIY options for speakers to driver from a 300B amp I inherited (8wpc Kit 1). Could I get the plans for 3pi? Any assistance is greatly appreciated.
Wayne Parham Messages: 18676 Registered: January 2001
Illuminati (33rd Degree)
I prefer to send either three Pi or four Pi plans because they are so similar. I realize you probably didn't know that when you asked for the four Pi plans earlier, so but please decide if you really prefer the three Pi speaker to the four Pi speaker.
To help you decide, read the sections of the Pi Speakers FAQ that describe differences between models, upgrades and options.
Thanks for the reply - although I would likely prefer the larger 4 PI system, I have realized that the three PI will be a better fit due to space constraints in my space.
48h350 Messages: 11 Registered: November 2011 Location: AUSTRALIA
Chancellor
Hello Wayne, can you please send me the plans for 3Pi.
I understand that I can buy the wave guide and the crossover separately.
I am based in Australia and have the 2 compression drivers already.
I can get the lower spec woofer locally.
Thanks !
48h350 Messages: 11 Registered: November 2011 Location: AUSTRALIA
Chancellor
Thank you Wayne.
I have some questions regarding the components for the 3Pi.
When buying the crossover for the 3Pi is there an option to specify what drivers it will be used with?
In my case Delta-12LFA( that I can source locally ) and the DE250( that I already have )
I saw on the crossover notes that there are different components involved for different drivers
Is the 100W 8 Ohms zobel to be purchased separately ? .
Kind regards,
Massimo
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
