AudioRoundTable.com: Source » repalcing belt on sony ps-lx250h

Home » Audio » Source » repalcing belt on sony ps-lx250h

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

repalcing belt on sony ps-lx250h [message #13056]

Mon, 14 August 2006 11:41

jmarwil
Messages: 1
Registered: May 2009

Esquire

Hello,
Found the sony in the basement, but missing a belt, got a new belt, can't figure out how to put it on correctly. Any help would be much appreciated.

Thanks,
jmarwil

Report message to a moderator

Re: repalcing belt on sony ps-lx250h [message #13058 is a reply to message #13056]

Mon, 14 August 2006 16:13

Wayne Parham
Messages: 18682
Registered: January 2001

Illuminati (33rd Degree)

Does the platter have a rubber mat? If so, remove it and check underneath for a couple of access holes. If there are holes in the platter and you can see the base through it, you can access the belt and put it in place. Just rotate the platter and thread the belt into position.

Report message to a moderator

Re: repalcing belt on sony ps-lx250h [message #13066 is a reply to message #13056]

Sat, 19 August 2006 17:59

Paul C.
Messages: 218
Registered: May 2009

Master

Here are instructions (link below) for replacing turntable belts.

I have one thing to add... do not use 3-in-1 oil. It dries out and gets gummy. There are a number of good machine oils, Singer Sewing Machine Oil, Xacto Oil (from hobby shops), Breakfree CLP, Triflon, and others. All of these come in nice oiler tip containers.

http://www.turntableneedles.com/index.asp?PageAction=Custom&ID=3

Report message to a moderator

Previous Topic:	Turntable problem
Next Topic:	Just got my SME arm back from re-wire. Hubba Hubba!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 04 04:10:11 CDT 2024