Home » Sponsored » Pi Speakers » 4 Pi Build in San Luis Obispo - Flush Mounting and Bracing
Re: 4 Pi Build in San Luis Obispo - Settings for Flanking Subs [message #94068 is a reply to message #94063] Tue, 20 July 2021 10:52 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18155
Registered: January 2001
Illuminati (33rd Degree)

It never hurts to use a high-pass filter for vented subs set at or just below the Helmholtz frequency. So if your sub cabinets are tuned to 20Hz, set a fourth-order high-pass at 15-20Hz.
Previous Topic: 28kHz standing waves and diffraction schlieren demo
Next Topic: 3 Pi plan request
Goto Forum:
  


Current Time: Thu Oct 28 09:56:52 CDT 2021

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest