Home » Sponsored » Pi Speakers » Flat-Pack Kits!
Flat-Pack Kits! [message #91511] Sat, 29 February 2020 15:56 Go to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 17804
Registered: January 2001
Illuminati (33rd Degree)

I am pleased to announce that Pi Speakers now has flat-pack kits!
We only have flat pack kits for the four π cabinet at this time, but other models are coming soon.

That's not entirely true - We have the midhorn available as a flat-pack kit and have for many years. It's in the "Parts And Options" section of the shopping cart. But that was just for the horn flare.

Now we're offering flat-pack kits for our loudspeaker cabinets. They're MDF, and you can order your kits for surface mounted drivers or for flush mounted drivers. We have both options.

Each flat-pack kit contains pre-cut parts to build one loudspeaker cabinet. So if you want a stereo pair, order two. If you order two kits, we'll assume you want a mirror-image pair, and will ship one cabinet with the port on the left and one with the port on the right.

If you only order one speaker, please mention the desired port side in the notes section of the order. If you order three speakers and want the center channel sans-port with waveguide centered, mention that in the notes. We can do that too. But don't do a port delete on a stereo pair. They work best vented as designed, and only a center channel should be considered to be run sealed when it is used with vented right and left mains.

If you want to veneer the cabinet, apply the veneer after assembling the cabinet with the MDF panels. That ensures best quality. We considered offering veneered panels as an option, but the edge quality is better if the cabinet is completed before applying the veneer.

We'll be adding models as fast as we can. The three π subs will probably be next and the three π mains soon after. We'll also offer one π and two π models as soon as we can.
Re: Flat-Pack Kits! [message #92054 is a reply to message #91511] Sun, 21 June 2020 10:26 Go to previous messageGo to next message
alexg is currently offline  alexg
Messages: 1
Registered: June 2019
Esquire
Hi Wayne,

Are the Four Pi flat packs MDF or Wood? In the post above you mention that the flat packs are MDF. On the Four Pi speaker kit page on your website it talks about the flat pack providing all the wood panels needed to build the cabinet.

Happy Father's Day!

Thanks,
Alex
Re: Flat-Pack Kits! [message #92055 is a reply to message #92054] Sun, 21 June 2020 17:31 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 17804
Registered: January 2001
Illuminati (33rd Degree)

The flat packs are made of MDF.
Previous Topic: 4Pi plans request
Next Topic: Small horns
Goto Forum:
  


Current Time: Tue Jul 07 17:30:55 CDT 2020

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest