Home » Sponsored » Pi Speakers » 4 Pi plans
4 Pi plans [message #82737] Thu, 26 May 2016 14:12 Go to next message
Paolo is currently offline  Paolo
Messages: 9
Registered: May 2009
Esquire
Hello Wayne, could you send me the constructive plans for 4 Pi speakers, and the crossover circuit dedicated to eminece H290?
Thanks for your time
Re: 4 Pi plans [message #82744 is a reply to message #82737] Fri, 27 May 2016 10:55 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18676
Registered: January 2001
Illuminati (33rd Degree)

You've got mail!

Note: The schematic is for our H290C waveguide, not the old Eminence radial horn. However, the only difference is you must remove resistor Rs and add 0.47uF capacitor C1 when using the radial horn.

I suggest that you not do that. The radial horn was very good, but the H290C waveguide is much better. It doesn't cost much more and is well worth it.

Previous Topic: 4pi 100 watt 8ohm resister?
Next Topic: Non-inductive Load Resistor Inductance Reading
Goto Forum:
  


Current Time: Sat Apr 20 02:59:50 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest