Bob Brines Messages: 186 Registered: May 2009 Location: Hot Springs Village, AR
Here are the speakers I will be demonstrating this year in the Brines Acoustics room:
The tower is a MLTL using the Mark Audio Alpair 10.2. It is intended to be used stand-alone away from the walls in a moderate sized room. The Little guy is a folded TL using the Mark Audio Alpair 7.3. I demoed this one last year as a stand-alone. This year, I added a somewhat larger (!) speaker to handle the bottom end. The bass bin is a Goldwood GS-1858 in an H-frame open-backed baffle. This adds a bit of bass to the little 4" Alpair to say the least. The cross-over is handled by a miniDSP.
AudioFred Messages: 373 Registered: May 2009 Location: Houston
Illuminati (1st Degree)
Here's a picture of the PoddWatt amplifier I'll have at the LSAF, recently upgraded with blue LED's under the driver tubes. These blue LED's enhance the visual image of the blue-painted Edcor transformer bells, and they have a huge psychoacoustic effect on the sound quality;
Keith Larson Messages: 34 Registered: May 2009 Location: Boston
Hello to everyone,
Smith & Larson Audio will also be attending. Version 6 of our software is about to be released and will be demonstrated. If you have any questions about measuring drivers, speakers, designing crossovers, or anything else for that matter, please stop by.
PS: My brother is also planning to attend and will bring his MAC so I should be able to demonstrate on that platform as well.