AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 7Pi plans request

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

7Pi plans request [message #68793]

Sun, 31 July 2011 04:32

fergs1
Messages: 1
Registered: July 2011
Location: Australia

Esquire

Greetings Wayne, I'm wondering about the suitability of a single 7Pi for a mono system. I know the corner horn is tuned to the mid 30'shz but what will it play up to. Also I was thinking of using a B&C250 with the QSC econowave guide. Suitable?
I kindly ask for the plans for the corner horn and crossover details. As I live in Australia I dare say postage for the mid horn will be xxx and so would it be alright to have a copy of the mid horn plan as well. Do I assume correctly that the 7Pi would be suitable with a SET amp (not high order crossovers, well behaved impedance)
thanks in advance fergs

Report message to a moderator

Re: 7Pi plans request [message #68796 is a reply to message #68793]

Sun, 31 July 2011 09:00

Wayne Parham
Messages: 18686
Registered: January 2001

Illuminati (33rd Degree)

You have mail!

I would not suggest making modifications unless you have test equipment and can measure the polars and make changes to the crossover as necessary. This design is optimized for the drivers and sound source locations as they are shown in the plans.

Report message to a moderator

Previous Topic:	Plan requests
Next Topic:	Thanks!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 08 18:14:19 CDT 2024