AudioRoundTable.com: Pi Speakers » Setting 4pi LCR upside down in theater?

Home » Sponsored » Pi Speakers » Setting 4pi LCR upside down in theater?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Setting 4pi LCR upside down in theater? [message #68640]

Tue, 19 July 2011 13:04

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

The bottom of our 180" AT screen will be about 6' off the floor. With a 45 degree vertical dispersion, can I lower my horns to hit more of the audience by flipping the 4pis upside down? Someone over at the AVS forum recommended this to me.

Report message to a moderator

Re: Setting 4pi LCR upside down in theater? [message #68642 is a reply to message #68640]

Tue, 19 July 2011 14:28

Wayne Parham
Messages: 18784
Registered: January 2001

Illuminati (33rd Degree)

I'd suggest doing that too.

Report message to a moderator

Re: Setting 4pi LCR upside down in theater? [message #68644 is a reply to message #68642]

Tue, 19 July 2011 14:43

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

Well that was an easy answer. I drew a schematic that showed that the front row of tables would be just below the 45 degrees if installed right side up. Up side down everyone gets full coverage. Smile

Report message to a moderator

Previous Topic:	Plans Request
Next Topic:	Modifed 4 Pi Build Report

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 19 02:54:52 CST 2024