Home » Sponsored » Pi Speakers » Plan requests (2pi 3pi 4pi)
Plan requests [message #68519] Fri, 08 July 2011 12:34 Go to next message
mrk7 is currently offline  mrk7
Messages: 3
Registered: July 2011
Location: Oz
Esquire
Hi Wayne

Can I please have plans for the 2pi, 2pi tower, 3pi and 4pi speakers.

Cheers

Mark
Re: Plan requests [message #68520 is a reply to message #68519] Fri, 08 July 2011 13:32 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

I would prefer for you to decide which model you want to build first. Let me know and I'll send the plans right out.

Re: Plan requests [message #68522 is a reply to message #68519] Fri, 08 July 2011 20:41 Go to previous messageGo to next message
mrk7 is currently offline  mrk7
Messages: 3
Registered: July 2011
Location: Oz
Esquire
Okay. Any chance I can at least have the external dimensions of those speakers with expected FR ranges in standard configurations?

At this stage I'm planning to build a front stage for my lounge room including L/R mains, dual sub boxes and entertainment unit using the same wood and need to figure out what will fit in my room.

Looking for strong lower mid bass output from the front mains (70Hz) with subs reinforcing mid bass but remaining more omnidirectional (cut off around 70 - 80Hz). Due to size restrictions I am considering using the sub boxes as stands for the mains (and possibly aiming the subs at the floor).

Any ideas or words of wisdom would be greatly appreciated Smile

Re: Plan requests [message #68524 is a reply to message #68522] Sat, 09 July 2011 09:40 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

The dimensions and basic specs are shown at the following page:
My suggestion would be to go with the three π or four π mains. Both are about the same size and perform similarly; The real difference is in the woofer family. Both match well blended with multisubs, and both sound very much the same, having similar spectral balance.

Re: Plan requests [message #68529 is a reply to message #68524] Sun, 10 July 2011 07:54 Go to previous messageGo to next message
mrk7 is currently offline  mrk7
Messages: 3
Registered: July 2011
Location: Oz
Esquire
Thanks Wayne. Am currently considering going all out with the 3pi atm.
Re: Plan requests [message #68531 is a reply to message #68529] Sun, 10 July 2011 09:27 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

You've got mail!

Re: Plan requests [message #68783 is a reply to message #68531] Fri, 29 July 2011 17:55 Go to previous messageGo to next message
6080WC is currently offline  6080WC
Messages: 1
Registered: July 2011
Location: French
Esquire
Is a Pi configuration that is closest of the Altec VOT A5 design or maybe even better?
High-Fidelity Uniform-Directivity Loudspeakers [message #68784 is a reply to message #68783] Fri, 29 July 2011 19:32 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

There is information on the design philosophies used in π Speakers at the link below:
Previous Topic: Plans for the 1pi & 2pi please.
Next Topic: 7Pi plans request
Goto Forum:
  


Current Time: Fri Nov 29 22:02:13 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest