Home » Audio » LSAF » Ready for LSAF? (What'cha bringing?)
Re: Ready for LSAF? [message #59384 is a reply to message #59383] Mon, 15 June 2009 11:54 Go to previous messageGo to next message
Shane is currently offline  Shane
Messages: 1117
Registered: May 2009
Illuminati (3rd Degree)
DRCope wrote on Mon, 15 June 2009 11:45
Shane,

No I haven't. Looks interesting, but by the time you bounce the low power built-in flash up and off the ceiling, you won't likely add much illumination to the scene, especially over any distance at all.

Stop by the Audio Note room and I'll lend you my SB600.

Dave


I don't know. In manual mode you can crank the built in up pretty nice. Not a substitute for an SB or anything, but it puts out quite a bit of light. I'm still learning to use the D40 indoors. I just don't take many photos inside at all.
Re: Ready for LSAF? [message #59387 is a reply to message #59350] Mon, 15 June 2009 15:56 Go to previous messageGo to next message
AudioFred is currently offline  AudioFred
Messages: 377
Registered: May 2009
Location: Houston
Illuminati (1st Degree)
I'm bringing the most affordable new system I have found whose sound doesn't offend. It includes the Dayton Audio BR-1 standmount speakers ($160), the Best Buy Insignia NS-R2000 stereo receiver ($113), and the Oppo DV-980H universal player ($169). Cables are generic.

No experienced listener is going to confuse this with a true high end system, and the purpose of this demo isn't to poke fun at expensive high end audio equipment. The purpose is to demonstrate to people who are listening to really awful sounding equipment (90+% of the adult US population) that you can build a system that sounds balanced and involving without breaking the bank. Hopefully many of the people who buy a system like the one I'm demonstrating will later go on to buy good entry level high end equipment.

I don't sell any of this stuff, but if asked I will build a pair of BR-1's for anybody who's uncomfortable doing it themselves. I will sell the completed speakers with some internal upgrading for $195, of if somebody is just uncomfortable with soldering the crossovers I'll do that for them for free (this is the way I suggest newbies do it because it still gives them the satisfaction of having built their own speakers).

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=300- 640

http://www.bestbuy.com/site/olspage.jsp?skuId=8254612&ty pe=product&id=1169512582154

http://www.oppodigital.com/dv980h/


Re: Ready for LSAF? [message #59407 is a reply to message #59387] Wed, 17 June 2009 22:53 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18670
Registered: January 2001
Illuminati (33rd Degree)
Good stuff there, guys!

I can hardly wait to see you all!!!
Re: Ready for LSAF? [message #59409 is a reply to message #59350] Thu, 18 June 2009 11:12 Go to previous messageGo to next message
Bob Brines is currently offline  Bob Brines
Messages: 186
Registered: May 2009
Location: Hot Springs Village, AR
Master
FYI I will be bringing my small MLTL's with fully EnABLed FE167s, my large MLTL's loaded with Lowther DX3's and a pair of 207/FT17H BR's. See you there.

Bob
Re: Ready for LSAF? [message #59410 is a reply to message #59409] Thu, 18 June 2009 17:25 Go to previous messageGo to next message
DRCope is currently offline  DRCope
Messages: 160
Registered: May 2009
Location: Brooklyn, CT
Master
Okay, so who else is at Embassy Suites with their system 90% set up at 5:20 on Thursday? (Andy Bey's singing "Willow Weep for Me" while I assemble the speaker stands.)

Very Happy
Re: Ready for LSAF? [message #59412 is a reply to message #59410] Thu, 18 June 2009 20:22 Go to previous messageGo to next message
Shane is currently offline  Shane
Messages: 1117
Registered: May 2009
Illuminati (3rd Degree)
DRCope wrote on Thu, 18 June 2009 17:25
Okay, so who else is at Embassy Suites with their system 90% set up at 5:20 on Thursday? (Andy Bey's singing "Willow Weep for Me" while I assemble the speaker stands.)

Very Happy




Not me. I just got back to Amarillo and will head out tomorrow morning. Hopefully be there by 3 or so.

Shane
Re: Ready for LSAF? [message #59413 is a reply to message #59412] Thu, 18 June 2009 22:39 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18670
Registered: January 2001
Illuminati (33rd Degree)
I'm here, just got setup.

We got here around 5:00pm, loaded in and fiddled around, ate and started setting up. Just got done, playing some Yes, Tales from Topgraphic Oceans.

Hey, has any of you tried using the HDMI or S-Video inputs on your televisions? We can hook up composite (AUX is set by tuning to channel 36) but it isn't immediately obvious to me how to select HDMI, VGA or S-Video. Might be unable to do it without the factory remote - these hotels love to hook up those weird gizmos to tie you into their network.

Anyway, I don't care that much at this point, I'm setup and ready to wind down. See you all tomorrow!
Re: Ready for LSAF? [message #59416 is a reply to message #59413] Fri, 19 June 2009 07:46 Go to previous messageGo to next message
DRCope is currently offline  DRCope
Messages: 160
Registered: May 2009
Location: Brooklyn, CT
Master
I'm in 306, Wayne. Where are you?
Re: Ready for LSAF? [message #59417 is a reply to message #59416] Fri, 19 June 2009 08:02 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18670
Registered: January 2001
Illuminati (33rd Degree)
I'm in 314, which I thought was an appropriate coincidence. Cool
Previous Topic: Question about LSAF
Next Topic: Music Heard at LSAF
Goto Forum:
  


Current Time: Thu Mar 28 10:57:35 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest