Home » Sponsored » Pi Speakers » EV SP15B in Pi 4 ???
EV SP15B in Pi 4 ??? [message #52899] Tue, 25 November 2008 15:49 Go to next message
James is currently offline  James
Messages: 23
Registered: May 2009
Chancellor
I've got a pair of these in mint condition, but I can't find complete T/S numbers. I'd really like to try them in a Pi 4 -style arrangement. Does anybody know where I might dig up detailed data on these? The Electro-vice site is no help -- not enough info.

Thanks in advance!

Re: EV SP15B in Pi 4 ??? [message #52900 is a reply to message #52899] Tue, 25 November 2008 17:53 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

According to ThieleSmall.com, the EVM 15B specs are as follows:

Brand Electro Voice
Model EVM-15B
Description
Range / type Woofer
Typical use PA
Recomended enclosure
Series Pro-Line
Manufacturer
Order nr
Production status Discontinued
Nom. diamerer [inch] 15
Vas [Liters] 260
Qts 0,3
Qes 0,31
Qms 13
Fs [Hz] 43
Sensitivity [dB] 101
Max Power [W] 400
Power definition continous
Lower freq [Hz] 60
Upper freq [Hz] 3500
Rec. Filter freq [Hz]
xmax [mm] 3,25
Moving mass [g] 48
Disp area [m2] 0,086
Disp Vol [cm3]
xdamage [mm] 12,5
Air gap [mm]
Coil height [mm]
Coil diameter [mm] 62,5
Cms [mm/N] 0,214
Rms [N*s/m] 1,4
Magnet weight [gr] 2,225
Magnet height [mm]
Magnet diameter [mm]
Magnet material -
Re [ohm] 5,2
Z [ohm] 8
L [mH] 0,5
Bl [Tm] 17,5
Magnetic flux [Wb]
Flux density [T]
Outer diam. [mm]
Bolt circle [mm]
Nr of bolts [Nr]
Cutout [mm]
Weight [Kg] 9,08
Height [mm]
Depth [mm]
Driver volume [Liters]
Frequency SPL / Z
Home page [URL] http://www.electrovoice.com
Data sheet [URL}
Enterd by -
Date reviewed 2003-11-09
Date added 2003-11-09


Re: EV SP15B in Pi 4 ??? [message #52901 is a reply to message #52900] Tue, 25 November 2008 19:12 Go to previous messageGo to next message
James is currently offline  James
Messages: 23
Registered: May 2009
Chancellor
Hi Wayne,

The EVM series and the SP series aren't the same. The SP-15B is a smaller magnet version of the SP-15, both of which were originally designed for hi-fi use (complete with whizzer cone). They are lower Fs, higher Qts, and lower sensitivity than the EVM's. The Electrovoice website does give a suggested box/vent size, but I'd sure like to find the detailed T/S numbers and see what a Pi-aligned enclosure would look like.

Thanks very much for the info, and your effort. The search continues ...

James

Re: EV SP15B in Pi 4 ??? [message #52902 is a reply to message #52901] Tue, 25 November 2008 19:56 Go to previous messageGo to next message
Chris R. is currently offline  Chris R.
Messages: 82
Registered: May 2009
Viscount
Not cheap, but you can get Woofer Tester from PartExpress.com for $100 that will measure these for you.

Re: EV SP15B in Pi 4 ??? [message #52903 is a reply to message #52899] Wed, 26 November 2008 18:28 Go to previous messageGo to next message
Bill Wassilak is currently offline  Bill Wassilak
Messages: 402
Registered: May 2009
Illuminati (1st Degree)
Try this site they have a listing for the SP15A's but not the B's, which should be pretty close, I think the A's were for guitars and the B's were for bass guitar. The only difference between the EVM15L's and the EVM15B's were the L's had 3 or 4 extra ribs on the cone to make it stiffer, where as the B's didn't have those extra ribs, which only varied the Qms and Vas of the speaker if I remember right.

Re: EV SP15B in Pi 4 ??? [message #52905 is a reply to message #52903] Wed, 26 November 2008 22:32 Go to previous messageGo to next message
James is currently offline  James
Messages: 23
Registered: May 2009
Chancellor
Wow, what a great resource -- thanks for the link!

I'm probably wrong, but the limited literature I've been able to find on the EV SP-15B indicates that it's closer to the SP-15, both with whizzer cones, ceramic mags, stamped-steel baskets, and intended for hi-fi use. The SP-15 even had a midrange/treble control. The SP-15A has a cast basket, and an Alnico mag (I think).

You may well be right that there is little difference among them, but in one piece of EV lit I found regarding the SP-15B, it was suggested that it's best use was in an infinite baffle. If I understand that application correctly, which I probably don't, then it might be that the SP-15B has a much higher Qts, making it a very different animal.

I think I'm going to get that woofer tester from PE.

Thanks again for the link ... I found info on several other speakers I was having trouble finding.

Happy Thanksgiving to all!

Best,

Jim

Re: EV SP15B in Pi 4 ??? [message #52906 is a reply to message #52902] Wed, 26 November 2008 22:34 Go to previous messageGo to next message
James is currently offline  James
Messages: 23
Registered: May 2009
Chancellor
Good suggestion, thanks! It'll come in handy for other projects too, I'm sure. I think I just got a new item to add to my holiday wish list ../emoticons/winkie.gif
Smith & Larson [message #52908 is a reply to message #52906] Thu, 27 November 2008 11:04 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

I strongly recomend the woofer tester from Smith & Larson instead. Keith Larson is the developer of the product and he and Parts Express went their separate ways when PE started making a clone. I like Parts Express and don't want to disparage them, but I don't think they should be making what amounts to an unlicensed copy of the original S&L woofer tester. It doesn't have the features and enhancements of the ones made at Smith and Larson either, so beyond principle, the S&L models are better products too. In short, get parts at PE - they're a great supplier - but don't get your woofer tester there.
Re: EV SP15B in Pi 4 ??? [message #52909 is a reply to message #52905] Thu, 27 November 2008 11:07 Go to previous message
Bill Wassilak is currently offline  Bill Wassilak
Messages: 402
Registered: May 2009
Illuminati (1st Degree)
Yes it would be best to get the woofer tester. Also speakers with a higher Qts should go into an infinite baffle, either that or they'll need a larger bass reflex type cabinet of some sort.

Happy Thanksgiving!
Bill

Previous Topic: ke-33 woofer !!!
Next Topic: Oy! I'm stuffed!
Goto Forum:
  


Current Time: Sat Nov 23 04:54:04 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest