Home » Sponsored » Pi Speakers » 7 Pi woofers
7 Pi woofers [message #52628] Sat, 13 September 2008 22:44 Go to next message
jimbop is currently offline  jimbop
Messages: 60
Registered: May 2009
Location: Colorado Springs, CO
Viscount
Wayne, do you know if the Altec 515G would be a suitable woofer for the 7-Pi?

Jim Dombrowski

Re: 7 Pi woofers [message #52630 is a reply to message #52628] Sun, 14 September 2008 02:12 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

The Altec 515G (8G, 16G) works well in the four π or seven π cabinets. Response is just what you want for home hifi, slightly overdamped, much like the curve that results from a JBL 2226.

The 515G is suitable for use in vented cabinets from 2.0ft3 to 5.0ft3 tuned to 40Hz to 50Hz. The lower tuning makes the cabinet slightly overdamped. A slightly higher tuning is best if the cabinet is used outdoors or in large spaces.

Note that not all 515 drivers have similar electro-mechanical specs. The 515B and 515C, for example, work best in larger boxes up to 15ft3.


Re: 7 Pi woofers [message #52632 is a reply to message #52630] Sun, 14 September 2008 13:45 Go to previous message
jimbop is currently offline  jimbop
Messages: 60
Registered: May 2009
Location: Colorado Springs, CO
Viscount
Most of what I read states that the 515G needs a horn cabinet, so I would be reluctant to try it in a bass reflex type cab (such as the 4Pi). That's why I was asking about the 7Pi suitability.

Jim

Previous Topic: 8-Pi cubic feet and tunning freq?
Next Topic: 1 on the ramp, 1 in the hanger
Goto Forum:
  


Current Time: Fri Nov 22 21:19:41 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest