my delta 12lf's are in 3.5 cu.ft. boxes,with 2-4in. ports 6.25 in. each in length. 40-45 hz. These are no where near the port size Wayne uses. Why such a large difference? Should I retune?
Wayne Parham Messages: 18787 Registered: January 2001
Illuminati (33rd Degree)
Check out the Helmholtz formula below. You can tune to the same frequency using different port sizes. As port area is increased, port length also has to be increased to tune to the same frequency. When in doubt, measure impedance and look for the minimum between the peaks.
Here's a little BASIC program that will calculate the formulas for you:
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
