Hello: Got lucky on ebay and picked up a pair of 2226H jbls and a pair of 2426 compression drivers with the JBL horns (i think 3970's). I'm thinking to use them to build up a Pi design. Presently they are in cabinets but their origin is unknown but they are a simple vented design (port on the rear) with an unknown crossover. The professional 4 looks like a good candidate or possiblly the 7 pi corner horns (will need a midrange driver to go with JBLs) Is the JBL 2426 a good match for these designs if used instead of the recommended drivers on the site. Are plans available for sale? What would be a good crossover implementation for the 4 and the 7 given I would use both JBLs (and a mid for the 7 version). Would appreciate any help/advise in this regard
Wayne Parham Messages: 18756 Registered: January 2001
Illuminati (33rd Degree)
The parts you purchased on eBay will work perfectly in this design. Grab a pair of Eminence Delta 10's or JBL 2012's for mids and you'll be set. I've sent plans to your E-Mail address.