Home » Audio » Radio » Telechron Clock Motors (A callout for anyone needing repair or replacement of their clock/radio)
Telechron Clock Motors [message #92639] Thu, 19 November 2020 09:50 Go to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 17913
Registered: January 2001
Illuminati (33rd Degree)

I want to give a quick callout for Dave Friedlund of TelechronClock.com. If you have a clock/radio that needs clock repair - if the clock runs slow or not at all - check to see if it has a Telechron motor in it. And if it does, send it to Dave and he'll fix you right up.

Brief back story:

I have a Montgomery Ward clock radio that has worked perfectly for many years, but the clock stopped working recently. It actually worked fine when I bought it over ten years ago. But I replaced the capacitors and rewired it 'cause the insulation was brittle and cracking. Never had to work on the clock.

It started getting pretty noisy about a year ago and eventually the clock stopped working. So I looked at the movement and found the mechanism was in good shape. I cleaned the gears with brake cleaner and put some clock oil on its little bushings. No joy. So I pulled he motor out and installed it backwards. This way the motor would have no load and I could see the output shaft. It didn't spin, but if I lightly tapped it, it would spin for a little while and then stop.

The motor had several identifiers stamped on it, but the one I thought was its part number was "H3HNK." So I did a search for that on the internet. As I sat down to the computer to try a search, I wasn't really optimistic about finding it. It seemed likely to me that this was old and forgotten technology.

Much to my surprise, I found a handful of eBay listings, so I bought one. Some guy had listed a motor he said was refurbished and offered with a 5 year warranty so I pulled the trigger on that one.

A little more searching brought me to the TelechronClock.com site I mentioned above. That site was a wealth of information, including instructions how to interpret date codes and how to identify different versions of the motor. It also described the technical details and history of the technology of these little motors.

It's very interesting stuff, and rather than re-state the information here, I encourage you to pop over to Dave's website and read about it there.

After reading a little more about Dave's site and service, I decided it might be wise for me to send the existing H3HNK motor I had to Dave and ask him to refurbish it. It's not like they're making any more of them. So I wrote to him and asked him about it, and he told me to send it on over. And I did.

The first eBay motor arrived, and I installed it. It worked perfectly. Ironically, that "eBay guy" I blindly purchased from - the one that advertised the 5 year warranty - was Dave. So I now have two refurbished H-3 motors from him. One in the clock and one for a spare.
Re: Telechron Clock Motors [message #92656 is a reply to message #92639] Sat, 21 November 2020 22:19 Go to previous messageGo to next message
Lost the Remote is currently offline  Lost the Remote
Messages: 145
Registered: June 2017
Master
Hey, thanks for sharing! I appreciate it. Madison and I are often called on to repair the old electronics that our family members have when they refuse to upgrade to something new. I'm bookmarking his information since we're bound to need it sooner or later. I've been burned before, so it's nice to know who is trustworthy.
Re: Telechron Clock Motors [message #92664 is a reply to message #92656] Mon, 23 November 2020 09:04 Go to previous message
Rusty is currently offline  Rusty
Messages: 432
Registered: May 2018
Location: Kansas City Missouri
Illuminati (1st Degree)
I'm happily enlightened knowing such an obscure and arcane service is available to people. That someone invests their time and effort providing with integrity. Nice to know something like this still exists to keep things going still from a time when things were fixable and made durable. Like the old fix it shops that used to proliferate. That's a definite link keeper. And I don't even have an old clock like that.
Previous Topic: Any Suspense fans here?
Next Topic: Replacing factory radio
Goto Forum:
  


Current Time: Fri Dec 04 08:43:31 CST 2020

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest